How To's  - Your Helpfully Guide

Honeywell Alarm System Wireless Battery Repalcement Steps

1. Determine the battery. Every wireless door and window sensor uses some type of battery. You must determine the type of battery that the sensor uses. This is necessary for purchasing the correct replacement. Most Honeywell door and window sensors will use a CR2032 lithium Coin, a CR123A lithium battery, AAA batteries or AA batteries. If you are unsure of which type of battery your sensor uses.

2. Remove the back cover. Remove the back cover for the sensor. Many Honeywell door and window sensors require a flathead screwdriver to do this. The flathead screwdriver is pushed into a slot so that a tab can be pressed. This will allow the back cover to be removed. You should be able to gently pull the back over off. You should never have to force or pry it off. More instructions for removing the back cover can be found in the instruction manual for the sensor.

3. Replace the battery. Remove the old battery from the sensor. You should be able to gently pop it out. Then apply the new battery. Make sure that it is facing the proper direction. This can be determined by checking the positive (+) and negative (-) ends of the battery.

4. Reapply the back cover. Put the back cover back on the sensor. It should snap securely into place.

4.  At Keypad - User code & 1 (off)  - clear it twice to reset panel sensor

How do I setup my Sonos Speakers on my eero Network? - Basic Setup

Before you start:
Recommended Basic Setup:
How To set up a new Sonos System:
How to add a speaker to your Sonos System:

Before you start:

Place your speaker(s) in your desired location and connect to power, for all wireless setups please do not connect an ethernet cable to any of the Sonos devices..

Download the Sonos app for iOS or Android. 

The app will guide you through the set up process.

Recommended Basic Setup:

For the simplest set up with optimal performance, eero and Sonos recommend connecting your Sonos speakers over Wi-Fi to your eero network. No speakers should be plugged into any eeros on your network via an ethernet cable. See below for examples.

Examples:

Key:

How To set up a new Sonos System on eero Wi-Fi:

Open the Sonos app for iOS or Android.

Tap Set up a new system, then create or sign in to your Sonos account.

On the Auto Discovery Screen tap continue next to Location and Bluetooth to give the Sonos app permission to use these so that your Sonos products can be automatically discovered.

Tap Add on the popup showing your Sonos product. If you are setting up using the Sonos S1 Controller, tap Continue > Set up products.

When your device is found, tap continue

Touch your Sonos device to the speaker in the location indicated by the app.

You will hear a chime when successfully paired. 

The app will ask for your eero network’s Wi-Fi password, type it in and press connect.

Select the name of the room your device will be in.

If an update is available you will be prompted to install it after assigning the room.

Once the update completes tap on done.

To set up more speakers, power them on in the room you’d like them in.

Stand next to the speaker you wish to add and open the Sonos App.

The app will automatically detect the new device, tap on add.

You will not need to re-enter your Wi-Fi password, the app will save it for you.

Follow the steps in the app to set up your music services.

How to add a speaker to your Sonos System after it has been setup:

Open the Sonos app for iOS or Android.

From the Settings tab, tap System > Add Product.

Follow the steps in the app to connect your new speaker to your Sonos system.

Having trouble connecting your new Sonos?  You can check out this article for troubleshooting tips. For information on recommended eero network configurations for Sonos, refer to this article.