CCTV SECURITY MAINTENANCE PROGRAM

Below we listed 15 items of importance to verify in caring for your CCTV equipment allowing for better quality results.

CAMERA HOUSING:

** VERIFY THE FOLLOWING
1. Camera / lens focus and auto iris adjusted properly.
2. Camera field of view is adjusted to customer’s requirements.
3. Camera / housing viewing window is clean, inside and out.
4. Camera lens is dust free.
5. Interior of camera enclosure is clean and dry.
6. Check operation of pan tilt, and zoom focus. Use controller in control room to check all these operations.

CABLE AND WIRE:

** VERIFY THE FOLLOWING
7. Check wiring and cable harnesses for wear and fray.
8. Check to make sure cable is dressed properly.
9. Check connectors and cable entry points for loose wiring.
10. Coaxial cable is transmitting an adequate video signal to control room. Signal should be free of distortion, tearing, hum-bars, EMI, and rolling, etc.
11. Make sure all coaxial connectors are insulated from conduit and pull boxes.

CONTROL EQUIPMENT:

** VERIFY THE FOLLOWING
12. Monitors are free from picture burn-in, and distortion.
13. Monitors have proper contrast and brightness.
14. DVR-NVR’s are functioning properly and provided distortion free recording.
15. DVR-NVR’s should be sent out for professional cleaning, and belt changes. This should occur on a regular basis